Install P601XXUDOJ5 Android 5.1.1 Lollipop on Galaxy Note 10.1 SM-P601

P601XXUDOJ5 Android 5.1.1 Lollipop official firmware for Samsung Galaxy Note 10.1 SM-P601 is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find P601XXUDOJ5 download link along with flashing instructions and rooting guide (if available).

Samsung Galaxy Note 10.1 SM-P601

P601XXUDOJ5 Firmware Details:

Model: SM-P601
Model Name: Samsung Galaxy Note 10.1
Version: Android 5.1.1 Lollipop
PDA: P601XXUDOJ5

P601XXUDOJ5 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

India: P601XXUDOJ5_P601ODDDOJ3_INU

(Firmware for rest of the countries and carrier will be added here when available)

[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

P601XXUDOJ5 Installation Methods:

There are several ways by which you can update the XXUDOJ5 firmware on your Galaxy Note 10.1 P601 such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Note 10.1 SM-P601 via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Note 10.1 SM-P601 through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update P601XXUDOJ5 Firmware on Galaxy Note 10.1 P601 through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXUDOJ5 5.1.1 Lollipop firmware on your Galaxy Note 10.1 P601 through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy Note 10.1 SM-P601 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power

2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 10.1 and tap Build Number for 7 times to visible the Developer options.) See the image below.

Enable Developers Options

3) Backup important data and settings to external storage- follow this guide

4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  

5) If your Galaxy Note 10.1 P601 have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update P601XXUDOJ5 5.1.1 Lollipop firmware on Galaxy Note 10.1 P601 through Odin: 

1) Download XXUDOJ5 5.1.1 Lollipop firmware for Galaxy Note 10.1 P601 from the above download section

2) Download Odin 3.09

3) Switch off your Tablet and boot Galaxy Note 10.1 P601 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode.  

4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5) Now connect your Galaxy Note 10.1 P601 to your computer via USB cable

6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.

8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5

9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: P601XXDLJ5_P601ODDDLI7_INU.tar.md5)

10) Now, click on the Start button to begin the installation process, wait few moments.

Odin3

11) Once completed, you would see “PASS!” message in ID:COM port having green background

12) Your device should automatically reboot after completion

13) You can now disconnect your device from computer

14) Finish

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 5.1.1 Lollipop build version number XXUDOJ5. You can verify the firmware update details from Settings-About Phone.

Related:

Update P601XXUCOF1 Android 4.4.2 KitKat Firmware on Galaxy Note 10.1 SM-P601 [Complete Guide]

Stuck at boot animation screen? Fix Bootloop on Galaxy Note 10.1 SM-P601

If anything goes wrong, your device may stuck at booting animation. If your Galaxy Note 10.1 SM-P601 stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root P601XXUDOJ5 5.1.1 Lollipop Firmware: 

We have arrange a detailed step by step guide to root P601XXUDOJ5 5.1.1 Lollipop firmware running on Samsung SM-P601. Open the below link for the rooting instructions.

How to Root P601XXUDOJ5 Android 5.1.1 Lollipop Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.
Share:

20 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Where's the instructions to root the p601 on Lollipop 5.11? Is this really possible at the moment?

    ReplyDelete
  3. ok ..fantastic rom..
    p601 rom india .
    no root

    ReplyDelete
  4. ROOTING YOUR SAMSUNG GALAXY NOTE 10.1 2014 EDITION 3G (SM-P601) RUNNING LOLLIPOP 5.1.1 ANDROID (RUSSIAN VERSION, P601XXUDOJ2_P601SERDOJ2_SER)

    Ps: you can install it, no matter what is your country, as it has all languages available by defaut. To find the firmware, go to www.samfirmware and search for P601 on devices firmware


    DOWNLOAD THE FOLLOWING FILES:

    Patched Kernel: patched_bootP601XXUDOJ2.img
    >>> http://www95.zippyshare.com/v/M4uruB7o/file.html2.img
    SuperUser: BETA-SuperSU-v2.52.zip”
    >>> http://www95.zippyshare.com/v/5YuBjKiu/file.html
    Flash software: ODIN 3.10.7
    >>> http://www21.zippyshare.com/v/phTz9bOz/file.html
    TWRP Recovery: twrp-2.8.7.0-lt03wifiue.img.tar
    >>> http://www95.zippyshare.com/v/U6396tn3/file.html


    Copy to the external SDCARD (or internal, whatever you want) of your tablet the files “patched_bootP601XXUDOJ2.img“ and “BETA-SuperSU-v2.52.zip”

    Start your tablet on DOWNLOAD MODE. (to do it, turn off your device, and then, hold the button VOLUME DOWN, and after it, press the POWER BUTTON. When you see the screen asking if you want to continue in DOWNLOAD MODE, confirm with VOLUME UP button).

    Now, open ODIN and click on AP button, choose the file “twrp-2.8.7.0-lt03wifiue.img.tar” and click on START button.

    (In case your process fail for any reason, try to uncheck the box “AUTO-REBOOT” inside “OPTIONS TAB”. To try this after a fail, you need to make the entire step again, and, if it is necessary, after complete, you shall reboot it manually, holding the POWER BUTTON, for few seconds).

    If everything goes ok, you should see “PASS” in ODIN.

    Now it’s time to put your tablet in RECOVERY MODE. To do it, with your device turned off, hold the button VOLUME UP, and then, press the POWER BUTTON to turn it on. A red frase “RECOVERY IS NOT SEANDROID ENFORCING” will be shown in the top left corner of your screen during startup. Now start your tablet in RECOVERY MODE (wait for a minute, it delays but will open the recovery mode).

    This mode you can only operate with you S-PEN, and be careful, because it is very sensitive.

    Select INSTALL, and click, in the bottom right of the screen, the button “IMAGES...” to change it to “ZIPS...”.

    Install the patched IMG file.

    After it, change again on that button from “ZIPS...” to “IMAGES...”

    Install the file “BETA-SuperSU-v2.52.zip”

    Reboot and you did it!

    ReplyDelete
    Replies
    1. Just remember the risks are by your own. With me, with worked like a charm!

      Delete
    2. This comment has been removed by the author.

      Delete
  5. do i have to install the .img and .zip files for the tablet to be rooted?

    ReplyDelete
    Replies
    1. Yes, you should follow the steps to get it done and avoid problems

      Delete
  6. i did exactly what u said and when i rebooted the tablet it didn't open it keeps rebooting again and again

    ReplyDelete
    Replies
    1. Maybe I forgot to say... If this happen, try to go to RECOVERY MODE and clear DALVIK CACHE

      Delete
  7. i also noted that when i go into the download mode there is something written in blue it says "Secure.Download = Enabled" i don't remember it was there back on kitkat
    i'm just wondering if this was the reason for the root fail

    ReplyDelete
  8. https://mega.nz/#!tIcCkT5J

    flash rom..twrp...use spen

    twrp
    https://www.4shared.com/file/admVce6Nce/twrp-2870-lt03wifiueimg.html

    root ok . no errors

    ReplyDelete
  9. Replies
    1. install twrp first... via .odin
      https://www.4shared.com/file/admVce6Nce/twrp-2870-lt03wifiueimg.html#sthash.lfrYyEQQ.dpuf

      after . falsh ROM
      https://mega.nz/#!tIcCkT5J

      live in brazil.
      india ROM installed
      note: game killer, guardian, gamehacker, not works

      Delete
  10. i need android 6.0.1 for galaxy note 10.1 2014 edition p601

    ReplyDelete

Popular Posts

Infolinks In Text Ads

Translate

Copyright © NasirTech | Powered by Blogger

Design by Anders Norén | Blogger Theme by NewBloggerThemes.com | Distributed By Blogger Templates20